TENSILE TESTS Tensile/tension testing is a destructive test whereby controlled tension is applied to a sample either as a load for proof testing or until it fully fails. This is used to find out how strong a material is and how much it can be stretched before it breaks. This test method is used to…
MACRO EXAMINATION Macro examination is a procedure in which a specimen is etched and evaluated macro-structurally at low magnifications, typically x10 or lower. For checking the quality of welds, macro examination can also be performed on a polished and etched cross-section of a welded material. During the macro examination, several features can be determined, including…
MICRO EXAMINATION Micro examination is performed on samples either cut to size or mounted in a resin mold. The samples are polished to a fine finish, normally one-micron diamond paste, and usually etched in an appropriate chemical solution prior to examination on a metallurgical microscope. Magnifications of x50 and above are used for micro…
The Charpy/Izod impact tests are standardized high strain-rate tests, determining amount of energy absorbed by a material during fracture. This absorbed energy is a measure of a material’s notch toughness and acts as a tool to study temperature-dependent ductile-brittle transition. It is widely applied in industry due to easy to prepare and quickly and cheaply…
Weld Testing As Teknolab we have initiated testing of welded joints in accordance with the universal standards EN ISO, ASTM, AWS, ASME and API Also we provide our customers who need destructive testing for WPQ and PQR in accordance with EN ISO 15614, ASTM, AWS D1.1, D1.5, D1.6, ASME sec. IX and API 1104 …
Ultra-Low Refrigerated-Heating Circulators Welding Charpy Izod Test. Ultra-Low Refrigerated Circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heat-up and cool-down times even for large volume, external systems. ‚FP‘ models offer proportional cooling…
In accordance with ASTM E 1019 standard of combustion method, C & S analysis are conducted in our laboratory. We started to analysis C & S in such various kind of materials as cast iron, ductile iron, cast iron with lamella/spherical graphite, ferro-alloy scraps and slags.
TeknoLab Ltd. Şti, which is accredited in accordance with TS EN ISO/IEC 17025 standard, started to provide elemental analysis service with HH–XRF for ALLOYS, SOIL, GEOCHEM, RESTRICTED MATERIAL (RoHS/WEEE), LIMESTONE, LOW Pb IN Cu, PRECIOUS METAL… RoHS/WEEE Directives In accordance with European Union (EU) directives of RoHS (Restriction of Hazardous Substances) and WEEE (Waste…
Rapid analysis with QLX1 it only takes 1 to 3 seconds to complete a full-blown analysis. Full coverage includes all relevant elements; no lock-out elements. C, P, S, N and further UV elements are available in ferrous calibrations. Argon-free mode allows certain tasks to be performed without gas. Maintenance free; no condensate. No electrode cleaning…
