Super Alloys

Air Industry , Marine Industry , Steam tribunes ; Also used in thermal power plants; Cobalt, Nickel, Titanium Super Alloy Analysis and Tests are offered to our valued customers. Chemical Analysis, Mechanical Test and Microstructure investigations were started. Cobalt Based Super Alloys Iron-Nickel Based Super Alloys Titanium Based Super Alloys  

Teknolab Tuzla Laboratory was Accredited

Tuzla Laboratory Accreditation Certificate http://www.turkak.org.tr/pdf/AB0646T7393.pdf?r=cb563c9c74974777b237723e68d2ea69   İkitelli Laboratory Accreditation Certificate http://www.turkak.org.tr/pdf/AB0646T.pdf?r=c2b1498270644dee9793e597d5bd298e   Tuzla & İkitelli Laboratories were accredited.   XRF PMI, spectral analyze, hardness measurements, tensile tests.   Destructive welding tests, notched impact tests, macro/micro inspections of weld seams, grain size measurement, graphite measurement for cast iron.   Notched impact tests:             TS EN ISO 9016,…

Destructive Tests for Welded Products

You can export your products with reports of accredited laboratory.   Quality-control departments of welding producers uses Welding/Welder Performance Qualification Record/Report (WPQR). Destructive tests of welded materials for WPQR have been performed by means of calibrated devices in laboratories of TeknoLab Ltd. Şti., accredited by TÜRKAK. In order to perform the tests in accordance with…

Z-Quality Tests for Welded Materials

What is Z-Quality Test? The Z-Quality test is a tensile test conducted perpendicular to the surface (i.e., Z-axis) of the plate in order to specifically measure ductility rather than strength.   APPLICATION STANDARDS: TS EN 10164: Steel products with improved deformation properties perpendicular to the surface of the product – Technical delivery conditions

Hardness Tests for Welded Materials

Hardness Tests Hardness of materials can be tested with various kind of hardness measurement methods. Therefore, results of hardness measurement should be characterized by the hardness measurement method used. Hardness of materials can be locally varied with welding process. APPLICATION STANDARDS: TS EN ISO 9015-1:      Destructive tests on welds in metallic materials – Hardness testing…

Fracture Tests for Welded Materials

WELD FRACTURE TEST Weld fracture test is performed to reveal embedded imperfections such as lack of fusion, incomplete penetration, cracking due to inadequate width to height ratio, slag inclusions and porosity.   APPLICATION STANDARDS: TS EN ISO 9017: Destructive tests on welds in metallic materials – Fracture test. This document specifies the sizes of test…

Bend Tests for Welded Materials

WELD BEND TESTS Bend tests are applied to welded metal strips in order to test the material at the bend location. Bending of the specimen is done around a cylinder of specified radius through a given angle. Once bent, the tested strips look like the letter U. The maximum extension occurs at the outside of…